Search results

slick-tastic!

Thanks! We are very excited about this new partnership! Its time to see some Can-Am's up on the podium in the WORCS series! G-

Looks good!!

Thats crazy! Its awesome how Adam Woodlee climbed right up in his Ultra4 buggy he raced at the king of hammers!

We have ran across the same things with the factory and other lt kits we have uninstalled when customers were upgrading to ours. We also post all of our shock specs on our website so any shock company the customer is partial to, can get shocks made for our kits if they are so inclined. But when...

The main limiting factors for the amount of travel are tire diameter and the amount of ground clearance we want when everything is bottomed out.. and for the droop side (extension of the suspension) it usually has to do with how much angle the cv joints, ball joints, and tie rods can take. And...

Call Weller Racing. They have a mount kit and rear drive set up for that motor. 480-507-4771 G-

We have a +6 XTR kit in stock, that just needs a few days for powdercoating. Shocks would be a couple weeks out. We will have a +4 MTS kit in stock in about a week, and have some slightly used Fox fully adjustable shocks in stock that we did the valving set up with. Or new shocks would be a...

Car looks awesome Curtis!! Very nice! G-

Good luck at the next race!!!!!!! G-

Awesome story!! Glad to see they got busted for stealing hard working peoples stuff! I hate thieves!!!!!!!!!

Car looks awesome btw!! Very nice!!! G-

There should be no binding of the rear driveline and our kit as long as you have everything mounted in the correct locations. Also, aside from that fact, if there was, the amount of spring pre-load you have won't have anything to do with that anyways. If you guys have a question let me know...

Sounds like a great candidate Jim! hahah. :D G-

Any takers? We are doing interviews this week.

haha. Not quite as much as 6 figs.. G-

If its not too late, tell the dirtbike boys they need a paddle on the back of their MX bikes. Skat Trak Hooker is the best. They will totally transform how the bikes run through the sand.. G-

February 24th, 2012 Lone Star Racing is currently seeking a new shipping manager for its Mesa, AZ based manufacturing company. We are looking for a candidate that is familiar with ATV and/or UTV parts, that has the following skills: Hard worker, Mechanically inclined, Familiar using windows...

Yeah, that picture is of his rear wheel, driver side joint, off the RZR XP. G-

Im not sure exactly what happened. There was no trace of boots on this side, so they could have came off, lost all the grease, and it was game over. The other side of the car still had the boots on, as the part of the boot under the clamps were melted to the housing. The boots were split into 2...

Here is the aftermath from a glowing red hot cv joint! You can see the ball tracks of the inner star have puddled steel, and the cage and balls are deformed.

Nice job Gary! Congrats!

I know the female threads on the end of the steering rack are M14 X 1.5 threads on both sides. I just got an idea. I will send you an email.. G-

LOL! Thats funny! Thanks for posting up those pictures! It was too bad we broke, but it was a lot of fun helping all the other cars get through that section. G-

Awesome trip!

Kick ass code! You deserve it! Drive hard! G-

Well, we powdercoat all of them textured black as part of the manufacturing process. So you will have to blast off the coating, if you want to do them another color. sorry. Hit me up next week, and we should have them ready to go. Thanks, G-

Good luck at Round 2!

The way i get the front end set up on a utv, is to center the steering wheel (make sure steering rack is in center as well) then take a measurement from the center of the tie rod bolt to a spot on the frame, and do the same on the other side (using same spots to measure). Adjust tie rods, so...

the last gusset is shipping out today... fyi. G-

We have the fronts and left rear in stock.. Right rear came back from heat treat, and they are going through powder..so we can ship them in a couple days. G---

Thanks guys.. We am looking forward to winning that trophy!! G-

1650 lbs dry, no driver... G-

Here are the finished pics:

at ride height.. about 13.5" of GC...

Oh.. and took this shot.. because there are some companies making radius rods that have a fixed pivot on one end.. and you can clearly see that they need to not only rotate up and down, but front to back.

More progress:

Install has started... Out with the old.. in with the new...

Here are some pics of the rest of the build started at our shop.. Branden's will be the 1st car running our new MTS Stage 2 Suspension for the RZR. No better test than King of the Hammers to make sure its up to par! We will be adding our new MTS Stage 2 suspension kit, along with Fox's new...

Coming together! Nice G-

Nice work B! G-

looks awesome!! G-

Looking good! G-

Re: UTVUnderground & Polaris Partner w/ Cognito Motosports / R3Motorsports -WORCS-RZR Awesome news! Kick some ass out there guys! G-

Im sure these work great with older engines that have fixed intake runners from the factory.. but the newer motors with variable intake lengths that move depending on RPM is hard to beat, as they should be the ideal length for that RPM making the most power across the entire range of RPM's not...

Right on! Keep that wheel base long for the desert! Your gunna have a blast with it! The only thing that will limit your speed is your balls! hahah. Yeah, we sold it a few months ago. G-

Looks good man! Glad to see you still playing with sxs's! G-

Looks awesome Curtis! Keep the pics rolling! G-

Cool to see the video's stepped up with interviews and such! Awesome! G-